Autokleen Plus

Highly versatile, low caustic haze remover for regular use. Efficiently removes most screen printing mesh stains and ghost images. Can be used immediately or left on over-night for best results.

Autokleen Plus

FOR REGULAR USE

A highly effective and versatile, low caustic haze remover. Can be used alone or in conjunction with Autosolve Industrial solvents for optimum cleaning power. Less aggressive to meshes than high caustic haze removers.

Features

  • Autokleen Plus is used for removal of ghost images and diazo stains on mesh, and can even be used for decoating gelatine indirect stencils! This highly versatile haze remover can be used in conjunction with “Autosolve Industrial AF” screen cleaning solvent for the effective removal of ghost images and ink stains. It is a simple to use, fast acting solution designed for manual application only. It is not recommended for use in automatic decoating machines.
  • The low Sodium Hydroxide content (<5%) makes Autokleen Plus an effective alternative to more aggressive haze removal products such as Autohaze (caustic content >20%).

Benefits

  • Can be used in four different ways depending on the type of stain:
  • Use on its own for removing Diazo stains, or for decoating gelatine indirect stencil films.
  • Use immediately with Autosolve Industrial for low level ink stains.
  • Leave to dry for 1 hour and then 'activate' with Autosolve Industrial for more stubborn stains
  • For ease of use Autoklee Plus can be left to dry over-night and then 'activated' in the morning
  • Low caustic level minimises damage to fine polyester screens

Applications

  • All types of ghost images on screens.

Additional Information

Please refer to Safety Data Sheet before using Autokleen Plus.

 

How to use Autokleen Plus

  1. Decoating solution for Gelatine indirect stencils - apply directly to the stencil using the Autotype Brush, once fully dissolved, rinse the screen with a strong water spray.
  2. Diazo stain removal - apply directly to the stain with the Autotype Brush or coating trough. Leave for 10 minutes and then rinse well with a strong water spray.
  3. Quick Method - for low level ink and stencil stains. Apply directly to the mesh with the Autotype Brush or coating trough, immediately apply Autosolve Industrial screenwash and work in well. Rinse with a low pressure water spray and then blast both sides of teh screen with a high pressure gun.
  4. 1 hour method - for medium ink and stencil stains. Apply directly to the mesh with the Autotype Brush or coating trough. Dry the screen with a cold air fan N.B. DO NOT USE HOT AIR. After 1 hour apply Autosolve Industrial screenwash and work in well. Rinse with a low pressure water spray and then blast both sides of the screen with a high pressure gun.
  5. 12 hour method - for optimum stain removal. Apply directly to the mesh with the Autotype Brush or coating trough. Leave to dry overnight N.B. DO NOT USE HOT AIR.  In the morning apply Autosolve Industrial screenwash and work in well. Rinse with a low pressure water spray and then blast both sides of the screen with a high pressure gun.

 

Want to know more about this product?

Applications

No related applications

How to Guides

No related guides