How to Guide - Multi-laminating Capillex
Synopsis...
Multi-lamination for high build applications
Multi-laminating sheets of Capillex 80 together is a useful technique for producing 100 micron (4 thou/mil) stencils for high build applications such as 3D garment printing or Braille.
Top tip
Do not pre-soak multi-laminated Capillex 80 stencil before washout as this will cause them to soften and breakdown especially if they are under exposed. It is best to use a strong spray of cold water (diffuse High Pressure Gun) from a minimum of 80 cms from the print side only.
Link to Capillex 80
The video below shows the recommended technique: